bandwidth mean in relation to the Internet

volusion.com

In this post, we will discuss Bandwidth and Frequency in detail with very practical and accurate examples.

Today we use hundreds of television channels but have you noticed why some channels are cheap and some are expensive?
All this is due to their bandwidth being more or less.
The higher the bandwidth of the channel, the higher the speed, which means that the data will be more capable of processing more.

Bandwidth is a widely used term in our digital media today.
Bandwidth; There is a total range of frequencies.
And in this way, a person also listens and speaks at the frequency of Bandwidth.

Today we will understand this as -
Band + Width ie
Band = strip or bunch of waves, or bundle
Width = width

Now, if we consider the band as waves, any mixed liquids or water, and rounding the pipe to the width, then the wider the pipe, the greater the amount of water.

The same happens in the exchange of our data.
Now we will talk about Frequency, this word is formed from Frequent i.e. fast, fast and finally suffix cy is added to it then it becomes frequency i.e. frequency, vibration, or repeatedly.
This frequency has a wavelength.

Frequencies of Bandwidth

Meaning the frequencies that move down around the main frequency are the length of their waves.

Like what if we say its main frequency
If 300, then 2 more frequencies below it
Which are in 250 and 350 respectively.

Whereas the main frequency is 300. Now the width between 250 and 350 speaks only bandwidth. There are smaller frequencies between them.
Now when we add it here with Bandwidth, it quickly reaches the bands ie Receiver which is within the bandwidth.
This is the frequency of Bandwidth that we measure in Hertz.

It is also worth noting here that we measure the digital form of bandwidth in bps.
While analog forms measure in hertz.
Yes, here bps mean bits/seconds.
Because where memory is relayed bps like kbps, Mbps it is Bytes/second.

Like Baseband has a digital signal transfer. Therefore, these digital signals are also called baseband signals.
The baseband signals take data in the binary form of 01 and transfer it to the binary form of 01 itself.
There is no modulation in it.

Now in short or short,
Bandwidth works to deliver data in a fixed amount of time.
In this way, every signal has a bandwidth.

To make this topic more interesting, we will present our point by example in the combination of both practical and digital.